Easy returns policy Learn more >

Free domestic shipping Learn more >

Skylight Shade

Comprehensive Description

Before installation, be mindful of obstacles in the window opening, such as cranks or handles, which can impede proper shade installation.

  • For the most accurate measurements, only use a steel tape measure.
  • Don't mix up width and height measurements. Always follow the width by height format (W x H) and mark them as such.
  • Measure to the nearest 1/8 inch. Never round up or down to the nearest half or whole inch.
  • If you’re measuring for more than one window, measure each one individually – never assume that your windows are the same size, even if they may look alike.
  • When assessing the mounting depth, consider any obstacles in the window opening, such as window cranks or handles. These can prevent you from mounting a shade properly.
  • Skylight Cellular Shades are not recommended for potentially moist situations.

Inside Mount

  • Width Measurement

Order width includes the width of the rails.

Measure three separate locations- top, center, and bottom widths of the window frame, round down to the nearest 1/8 inch, and use the smallest measurement as the shade width, ensuring your tape is horizontal for accuracy.

The factory will apply a small deduction of approximately 1/8 inch (3.2 mm) during production to ensure a safe and proper installation.

ORDER AT THE EXACT OPENING SIZE WITH NO DEDUCTIONS.

Attention: Please check if your windows have a splayed or recessed frame. If they do, measure the shortest width and use that measurement when placing your order; otherwise, the shades may not fit in the frame.

  • Height Measurement

Order height includes the height of the rails.

Measure three separate locations- left, middle, and right heights of the window frame, round down to the nearest 1/8 inch, and use the smallest measurement as the shade height, ensuring your tape is vertical for accuracy.

Make sure the most exact measurement for the height.

If the order height and exact height are inconsistent, the shade may not fit inside the window frame.

Depth

For the inside mount, the minimum depth required is 1 3/4 inches (4.5 cm).